SALSA CUTTHROAT C GRX 600 1X
SALSA CUTTHROAT C GRX 600 1X
Built for the rigors of America’s longest mountain bike race, the Tour Divide-inspired Cutthroat C GRX 600 1x is one of the best bikepacking bikes for long rides through a variety of conditions and surfaces when speed is of the essence. Designed with drop-bar mountain bike geometry and a lightweight carbon frame featuring our Class 5™ VRS for comfortable compliance, Cutthroat is ready to put in big miles on any terrain. Ample cargo mounts let you distribute weight evenly around the bike for maximum maneuverability. Shimano’s GRX 600 1x drivetrain provides brilliant braking and shifting with the gear range for gravel flats and mountain passes alike.
FRAME SPECS
- Design Wheel x Tire Size
- 29 x 2.25" (29 x 2.4" Max) (Some front derailleurs may reduce tire clearance. Check manufacturer’s specifications to confirm clearance before installing.)
- Susp Fork Length (Travel)
- 506 mm (100 mm Travel)
- Rigid Fork Length
- 483 mm
- Fork Offset
- 51 mm
- Front Spacing
- 110 x 15 mm Thru-axle
- Front Brake (Rotor)
- Flat mount (160–180 mm), flat mount frame standard (35 mm thickness), 42 mm bolt length
- Front Rack Mounts
- Yes, lowrider compatible. Salsa Down Under rack recommended.
- Fork Accessory Mounts
- Yes, one set of Three-Pack mounts on each fork leg
- Headset, Upper
- IS41
- Headset, Lower
- IS52
- Seatpost
- 27.2 mm
- Seat Collar
- 32.0 mm
- Dropper Compatible (Routing)
- Yes, internal
- Front Derailleur Type
- Road, braze-on, 2x, bottom-pull
- Bottom Bracket
- Press Fit BB92, 41 x 92 mm
- Crankset (Max & Min Ring)
- 1x MTN Boost: 40t Max; 2x RD Boost outer ring: 46–50t, inner ring: 30–36t *Oval chainrings subtract 2t from max*
- Rear Brake (Rotor)
- Flat mount (140–160 mm), flat mount frame standard (25mm Thickness), 32 mm bolt length
- Rear Spacing
- 148 x 12 mm Thru-axle
- Rear Axle Size
- Ø12 x 174, TP=1.5, TL=20
- Derailleur Hanger
- QBP #FS2322
- Rear Rack Mounts
- Yes, Salsa Rack Lock seatpost collar required. Salsa Wanderlust Rack recommended. Salsa Bent Rack Struts (part #RK8030) required for installation on 58 cm and 60 cm frames. Not compatible with Salsa Wanderlust HD Rack
- Rear Fender Mounts
- n/a
- Water Bottle Mounts
- Frames up to 54cm: 2 in main triangle. Frames 56cm and larger: 3 in main triangle.
- Under Downtube Mount
- Yes, two pair.
- Top Tube Mounts
- Yes, compatible with Salsa Top Tube bag.
- Internal Dropper Post Routing
- 1x mechanical drivetrain: Route the dropper post cable through the drive side of the down tube. Di2 drivetrains: Move the battery to the down tube, routing it through the head tube, then route the dropper post cable through the drive side of the down tube.
- External Dropper Post Routing
- 1x and 2x mechanical and Di2 drivetrains: Route the dropper post cable through the dynamo rear light holes on the non-drive side of the top tube.